- Features
- Tech Specs
- Reviews
Package Included
- 2PCS 400W 12V 10BB Mono Bifaicial Solar Panel
- 1PC Sunflow 40A MPPT Solar Charge Controller 12V/24V
- 1PC 3000W 12V Pure Sine Wave Inverter with Bluetooth
- 4PCS 12V 100Ah Group 24 LiFePO4 Battery
Features
BougeRV Bifacial 400W solar panel uses the high-level 10BB cell design which has a 23% highest conversion rate. Makes the solar panel have a longer service life. Increase the cell receiving surface, thinner ribbon reduces the covered area by 22%. Also, it can charge a 12V/24 battery or charge a 48V battery by wiring several solar panels in series.
Instead of having an opaque back, BougeRV bifacial solar panels feature a transparent backside, allowing it to absorb solar energy from both sides. It can not only absorb direct sunlight but also absorb refracted sunlight and diffuse sunlight, which makes the output better.
No visible defects and any microcracks, BougeRV 300 watts solar panel passes the strict EL test. While other class B and C cells will have obvious cracks. The grade of the cell determines the actual output of the solar panel.
Our new package offers ultimate protection with an extra protective strip on all sides, L-brackets on all corners, and an extra thick foam pad on the back. Trust that your shipment will arrive safely with our new package.
IP67 Rated Waterproof Junction Box can isolate environmental particles and low-pressure water jets. Diodes are pre-installed in the junction box, with a pair of pre-attached 3ft Solar Cables. Pre-drilled holes on the back of the panel allow you to quickly install solar panels without using heavy tools.
HIGHLIGHTS
BougeRV Sunflow 40 Amp MPPT controller can adjust the charge current from 0A to 40A. BougeRV charge controller for solar panels, its high tracking efficiency is up to 99.5%, peak conversion efficiency is up to 99%, maximizing the solar panels' output. Adopting quality aluminum heat sink, the battery regulator can dissipate heat better and minimize the power lost under full load working.
Certified by CE and RoHS. BougeRV 40A MPPT renewable energy controller features a dual MOS circuit to prevent the reverse current and reduce the heat in operation. With 6 protections, over-temperature, open-circuit, short-circuit, overload, polarity reverse prevention circuit, flow backward of current protections.
BougeRV Sunflow 40A MPPT solar charge controller features low-temp cut-off charging (below 32℉) to protect your LiFePO4 battery, it can also restart or activate dormant 12V or 24V LiFePO4 batteries turned off due to short circuits or over-discharged.
Fully 3000W output, all appliances under 3000W can be run. Equipped with 15A/20A outlets, making sure the BougeRV pure sine wave inverter can be run for a long time at 3000W.
BougeRV pure sine wave inverter is with built-in Bluetooth communication function, users can monitor operating data of the battery and appliances in any time through the BougeRV APP. Bluetooth acceptance range is 18-20M ( barrier-free).
The pure sine wave inverter provides pure power, with a low distortion rate (≤5%), ensuring proper operation of sensitive electronic equipment. Lower power consumption and high conversion efficiency. Pure sine wave inverters keep voltage and current at safe levels, which extends the life of appliances. Pure sine wave inverter always makes less noise than modified sine wave inverter.
With lithium battery soft startup protection function, the pure sine wave inverter is compatible better with lithium battery, preventing frequent disconnection. ( NOTE: If the surge current of inverter is greater than the over-discharge current of some lithium batteries, which will trigger the BMS protection function of these lithium batteries. Therefore, inverter will not work.)
With 2 high-speed cooling fans, BougeRV pure sine wave inverter can control temperature intelligently. Fan Cooling Startup: Temperature ≥113℉/ Output ≥50% (1500W).
Fully 3000W output, all appliances under 3000W can be run. Equipped with 15A/20A outlets, making sure the BougeRV pure sine wave inverter can be run for a long time at 3000W.
BougeRV pure sine wave inverter is with built-in Bluetooth communication function, users can monitor operating data of the battery and appliances in any time through the BougeRV APP. Bluetooth acceptance range is 18-20M ( barrier-free).
The pure sine wave inverter provides pure power, with a low distortion rate (≤5%), ensuring proper operation of sensitive electronic equipment. Lower power consumption and high conversion efficiency. Pure sine wave inverters keep voltage and current at safe levels, which extends the life of appliances. Pure sine wave inverter always makes less noise than modified sine wave inverter.
With lithium battery soft startup protection function, the pure sine wave inverter is compatible better with lithium battery, preventing frequent disconnection. ( NOTE: If the surge current of inverter is greater than the over-discharge current of some lithium batteries, which will trigger the BMS protection function of these lithium batteries. Therefore, inverter will not work.)
With 2 high-speed cooling fans, BougeRV pure sine wave inverter can control temperature intelligently. Fan Cooling Startup: Temperature ≥113℉/ Output ≥50% (1500W).
Standard dimensions of L10.24" W6.61" H8.23". The BougeRV Group 24 12V 100Ah LiFePO4 battery offers an excellent balance of space and performance, providing sufficient ampere-hours to meet a variety of needs while greatly saving space.
Provides low-temperature protection for battery charging. If the temperature falls below 32°F, it reduces or turns off current input and resumes charging at 35.6°F to ensure optimal battery health and extend battery life.
The BougeRV 12V 100Ah LiFePO4 battery provides 4,000–15,000 recharge cycles and has a lifespan of more than 10 years under ideal conditions.
Upgraded BMS:Provides overvoltage, low voltage, overcurrent, short circuit, low temperature, and high temperature protection for the battery. The BMS ensures the safety of normal battery use by monitoring battery status and extending battery life
Progressive Choice:Only 24.25 lbs,lighter than 66 lbs of lead-acid batteries. Charge Cycle Count of LiFePo4 battery is 4000-15000, which is much higher than 200-500 of lead-acid battery. LiFePo4 battery also supports full charge and discharge(100% DOD)
Product Specifications
SKU | ISE240 |
---|---|
Maximum Power (W) | 400±5% W |
Open Circuit Voltage Voc (V) | 37.1±5% V |
Max Power Voltage Vmp (V) | 31±5% V |
Max Power Current Imp (A) | 12.9±5% A |
Short Circuit Current Isc (A) | 13.8±5% A |
Solar Cells Efficiency | 23% |
Warranty Description |
10 years product warranty and 25-years power warranty |
Product Dimension (IN) | 67.9x44.6x1.4 inches |
Net Weight (kg / lb) | 45.21 lb |
Application Class | Class A |
Max Static Load (front) | 2400 Pa |
Max Static Load (back) | 2400pa |
Series Fuse Rating | 25A |
Product Type | Solar Panel |
SKU | ISE240 |
---|---|
Maximum Power (W) | 400±5% W |
Open Circuit Voltage Voc (V) | 37.1±5% V |
Max Power Voltage Vmp (V) | 31±5% V |
Max Power Current Imp (A) | 12.9±5% A |
Short Circuit Current Isc (A) | 13.8±5% A |
Solar Cells Efficiency | 23% |
Warranty Description |
10 years product warranty and 25-years power warranty |
Product Dimension (IN) | 67.9x44.6x1.4 inches |
Net Weight (kg / lb) | 45.21 lb |
Application Class | Class A |
Max Static Load (front) | 2400 Pa |
Max Static Load (back) | 2400pa |
Series Fuse Rating | 25A |
Product Type | Solar Panel |
SKU | ISE254 |
---|---|
Rated Output Power | 3000W |
Peak power
|
6000W(1s)
|
Output voltage
|
110VAC/120VAC(default)
|
Output frequency
|
50/60 Hz(default)
|
Rated input voltage
|
12VDC
|
The input voltage ranges
|
10V-15.5VDC
|
Output waveform
|
Pure sine wave
|
Maximun output efficiency
|
>90%
|
Full Load Efficiency
|
>86%
|
Battery low voltage alarm
|
10.5VDC (±0.3V)
|
Over-discharge voltage
|
10VDC (±0.3V)
|
Overvoltage
|
15.5VDC (±0.3V)
|
Operating ambient temperature range
|
-40°F~185°F(-40°C~85°C)
|
Storage temperature range
|
-40°F~176°F(-40°C~80°C)
|
Noise
|
≤60dB
|
Communication Port
|
RS485+Inbuilt Bluetooth
|
Fan start-up temp
|
≥113℉(45℃)/≥50% load
|
USB port
|
18W*1(5V-3A,9V-2A,12V-1.5A)
|
Protection function
|
Input over-voltage/
over-discharge protection,
output overload/short-circuit protection,
and inverter overtemperature protection
|
Output harmonic component(THD)
|
<5%
|
Over-temperature protection recovery
|
≤176℉(80℃)
|
No-load Loss
|
<0.9A
|
Over temperature protect
|
≥203℉(95℃)
|
Product size
|
15.25*7.94*3.83 in
|
Weight
|
14.3 lb
|
SKU | ISE254 |
---|---|
Rated Output Power | 3000W |
Peak power
|
6000W(1s)
|
Output voltage
|
110VAC/120VAC(default)
|
Output frequency
|
50/60 Hz(default)
|
Rated input voltage
|
12VDC
|
The input voltage ranges
|
10V-15.5VDC
|
Output waveform
|
Pure sine wave
|
Maximun output efficiency
|
>90%
|
Full Load Efficiency
|
>86%
|
Battery low voltage alarm
|
10.5VDC (±0.3V)
|
Over-discharge voltage
|
10VDC (±0.3V)
|
Overvoltage
|
15.5VDC (±0.3V)
|
Operating ambient temperature range
|
-40°F~185°F(-40°C~85°C)
|
Storage temperature range
|
-40°F~176°F(-40°C~80°C)
|
Noise
|
≤60dB
|
Communication Port
|
RS485+Inbuilt Bluetooth
|
Fan start-up temp
|
≥113℉(45℃)/≥50% load
|
USB port
|
18W*1(5V-3A,9V-2A,12V-1.5A)
|
Protection function
|
Input over-voltage/
over-discharge protection,
output overload/short-circuit protection,
and inverter overtemperature protection
|
Output harmonic component(THD)
|
<5%
|
Over-temperature protection recovery
|
≤176℉(80℃)
|
No-load Loss
|
<0.9A
|
Over temperature protect
|
≥203℉(95℃)
|
Product size
|
15.25*7.94*3.83 in
|
Weight
|
14.3 lb
|
SKU |
ISE212N |
---|---|
Nominal Voltage | 12.8V |
Nominal Capacity | 100Ah |
Charge Voltage |
14.4~14.6V
|
Energy | 1280Wh |
Standard charge | 20A (0.2C, recommend charge current) |
Maximum charge
|
100A(1.0C) |
Maximum Continuous Charge Current
|
100A (25°C, 77°F)
|
Maximum Continuous Discharge Current
|
100A (1C)
|
Maximum Discharge Current
|
330A (2.5s)
|
Over-Charging Protection Voltage
|
14.6V
|
Over-Charging Recovery Voltage
|
14.0V
|
Over-Discharging Protection Voltage
|
8.8V
|
Over-Discharging Protection Recovery Voltage
|
10.4V
|
Charge Temperature Range
|
0°C~65°C (32°F~149°F)
|
Discharge Temperature Range
|
-20°C~75°C (-4°F~167°F)
|
Cycle Life | 4000 times (25°C, 0.2C, 100%DOD) |
Low Temperature Charging Protection
|
0°C (32°F), after the low temperature
protection is activated, the battery
temperature returns to 2°C (35.6°F) for
recharging.
|
Short Term
|
-20°C~45°C (-4°F~113°F)
|
Long Term
|
10°C~35°C (50°F~95°F)
|
Maximum Series Voltage Of Battery Pack
|
48V(4S)
|
Maximum Parallel Current Of Battery Pack
|
400Ah(4P)
|
Charge Method
|
CC/CV
|
Item Demension |
L10.24*W6.61*H8.23
|
Item Weight | 24.25 lbs |
Protection Rating
|
IP65
|
Product Warranty | 5 Years |
SKU |
ISE212N |
---|---|
Nominal Voltage | 12.8V |
Nominal Capacity | 100Ah |
Charge Voltage |
14.4~14.6V
|
Energy | 1280Wh |
Standard charge | 20A (0.2C, recommend charge current) |
Maximum charge
|
100A(1.0C) |
Maximum Continuous Charge Current
|
100A (25°C, 77°F)
|
Maximum Continuous Discharge Current
|
100A (1C)
|
Maximum Discharge Current
|
330A (2.5s)
|
Over-Charging Protection Voltage
|
14.6V
|
Over-Charging Recovery Voltage
|
14.0V
|
Over-Discharging Protection Voltage
|
8.8V
|
Over-Discharging Protection Recovery Voltage
|
10.4V
|
Charge Temperature Range
|
0°C~65°C (32°F~149°F)
|
Discharge Temperature Range
|
-20°C~75°C (-4°F~167°F)
|
Cycle Life | 4000 times (25°C, 0.2C, 100%DOD) |
Low Temperature Charging Protection
|
0°C (32°F), after the low temperature
protection is activated, the battery
temperature returns to 2°C (35.6°F) for
recharging.
|
Short Term
|
-20°C~45°C (-4°F~113°F)
|
Long Term
|
10°C~35°C (50°F~95°F)
|
Maximum Series Voltage Of Battery Pack
|
48V(4S)
|
Maximum Parallel Current Of Battery Pack
|
400Ah(4P)
|
Charge Method
|
CC/CV
|
Item Demension |
L10.24*W6.61*H8.23
|
Item Weight | 24.25 lbs |
Protection Rating
|
IP65
|
Product Warranty | 5 Years |
SKU | ISE218 | ||
---|---|---|---|
System Voltage | 12V/24V | Battery Type | LiFePO4, SLD, GEL, FLD, AGM, User Defined |
Rated Charging Current | 40 Amp | Grounding Type | Common Negative |
Maximum PV Input Voltage | 100V (95V protection, 90V recovery) | Operating Temperature Range | -31℉ to 149℉ (-35℃ to 65℃) |
Maximum Input of PV System | 600W/12V; 1200W/24V | Protection Grade | IP34 |
Rated Load Current | 20 Amp | Bluetooth Communication | built-in bluetooth |
Charge Current Ajust Range | 0 Amp to 40 Amp | Data Storage | Save the last 200 days of historical data |
Battery Operate Voltage Range | 8V to 32V | Dimension | 8.94L*6.26W*2.95 inches |
No Load Loss | ≤10mA | Weight | 3.95 lbs |
Product Warranty | 18-month | Product Type | Solar Charge Controller |
SKU | ISE218 |
---|---|
System Voltage | 12V/24V |
Rated Charging Current | 40 Amp |
Maximum PV Input Voltage | 100V (95V protection, 90V recovery) |
Maximum Input of PV System | 600W/12V; 1200W/24V |
Rated Load Current | 20 Amp |
Charge Current Ajust Range | 0 Amp to 40 Amp |
Battery Operate Voltage Range | 8V to 32V |
No Load Loss | ≤10mA |
Battery Type | LiFePO4, SLD, GEL, FLD, AGM, User Defined |
Grounding Type | Common Negative |
Operating Temperature Range | -31℉ to 149℉ (-35℃ to 65℃) |
Protection Grade | IP34 |
Bluetooth Communication | built-in bluetooth |
Data Storage | Save the last 200 days of historical data |
Dimension | 8.94L*6.26W*2.95 inches |
Weight | 3.95 lbs |
Product Warranty | 18-month |